Aircraft Tools
                                            


 Home
Welding
Machining
Waterjet Cutting
Aircraft Tools
Tube Bending
Prototyping
Testimonials
Information

 

Bungee Installation Tool


This bungee installation tool allows you to install or replace nose gear bungee easily and safely in minutes.  No need to remove the engine, you can install the bungee with the engine in place.  Works on Zenith Aircraft CH750, CH650, CH701, CH801, 601HD, HDS and XL planes.

Comes complete with instructions.

$49.95 

If shipping outside the USA, please contact us prior to purchase.

 

 

Axle Drill Guides
Most spring gears aren't easy to fit in a drill press and are thick enough that if you drill by hand and hold your drill on a slight angle, you're axle won't fit.  We've designed the following axle drill guides to make it easy to drill bolt patterns through spring gear accurately with a hand drill.  If you need a drill guide that's not listed below or a custom tool, please contact us at travis@kobushweldingandmachining.com.

Axle Drill Guide - GAC Models 5013, 5015 & 5018

This 1/2" thick steel block exactly matches the Grove Aircraft Company axle model numbers 5013, 5015 and 5018.  Holes are 1/4".  No machine shop required.  Block fits axle supplied with Zenith Aircraft Company CH650 and 601XL.  Comes complete with instructions.

 
 

Call for pricing and availability.


Axle Drill Guide - GAC Models 5010, 5011 & 5012

This 1/2" thick steel block exactly matches the Grove Aircraft Company axle model numbers 5010, 5011 and 5012.  Holes are 1/4".  No machine shop required.  Comes complete with instructions.

Call for pricing and availability.

 

Axle Drill Guide - GAC Models 5016 & 5017 and Matco Axle 6

This 3/4" thick steel block exactly matches the Grove Aircraft Company axle model numbers 5016, 5017 and Matco Axle 6.  Top holes are 5/16" and bottom holes are 3/8".  Block fits axle supplied with Zenith Aircraft Company 801.  No machine shop required.  Comes complete with instructions.

Call for pricing and availability.

 


Axle Drill Guide - Matco Axle 7

This 1/2" thick steel block exactly matches the Matco Axle 7.  Holes are 1/4".  No machine shop required.  Block fits axle supplied with Zenith Aircraft Company CH750 and 701. Comes complete with instructions.

Call for pricing and availability.

 

If shipping outside the USA, please contact us prior to purchase of any products.

 

How to videos can be a very useful tool in building kit aircraft.  Videos can be purchased at www.HomebuiltHelp.com.